led water wave guide palte

1.Material PMMA 2.LED light source or T4/T5 light 3.Prototype size1270*1870 1260*2480 1540*3040 thickness 3-15m

1.our product can be cut to any size, simple workmanship, high efficient manufacturing, Control wastage easily

2. It can be made to any shape, thermoformable, it can be merged together, breakthrough the limit of traditional LGP.

3. High light convert rate, even and soft light output.

4. Applied to indoor and outdoor use, life span 8-10 years.

5. Natural double side light guiding, both single side use and double side use, especially economical for double side use.

6. Apt to any kind of dot or line light source, such as T4,T5,LED,CCFL,Fluorescent tube etc.

 

Series	Advised light input method	Light spread distance(mm)	Features
G Series	Single / Double / Four-side edge-lit	within 800	Basically meet all function use. For best harmonious illumination, the width should be better within 800mm;800-1200mm,8mm LGP is a better choice.
L Series	Double / Four-side edge-lit	within 1200	Advised best harmonious illumination area width within 1200mm;apt to wide and high requirement of harmonious light application.
D Series	Double / Four-side edge-lit	within 500	Advised best harmonious illumination area within 600mm;apt to lighting application which is small and high requirement of light output.
C Series	Single side edge-lit	within 1000	Advised single side illuminated area within 1000mm;apt to decoration application long distance but not high requirement of the brightness.
B Series	Double or Four-side edge-lit	within 600	The material is more transparent,but not good for long distance lighting.

 

Light guide plate for LED slim light box

Traditional LGP is a transparent acrylic panel made from pure PMMA resin, on whose bottom face a dot matrix is printed or a line matrix is scratched, while NanoLight LGP with matrix-less particle inbuilt as the acrylic panel poured out. The light source is installed on its edge(s). It distributes the light coming from the light source evenly over the whole upper face of the acrylic panel. It is a key component to maximize the uniformity of light, to make backlight slim and to reorient the line or dot light source such as fluorescent , decoration lamp or LED to the plate light source.